Hp ProLiant ML350 G6 Server User Manual download pdf (Page 72)

Hardware options installation 72

Close or install the tower bezel, as needed.

o Slide the server back into the rack.

11. Connect any required external cables to the expansion board. Refer to the documentation that ships

with the expansion board.

PCI-X expansion cage option

The PCI-X expansion cage option converts one PCI Express slot into two PCI-X slots for additional expansion

board capability. The PCI-X expansion cage does not support expansion boards with internal cabling

requirements.

This option provides health monitoring of the riser fans which appear as fans 5 and 6.

In addition, both expansion boards installed in the PCI-X expansion cage appear as slots 1 and 2.

To install the component:

CAUTION: To prevent damage to the server or expansion boards, power down the server and

remove all AC power cords before removing or installing the PCI-X expansion cage.

1. Power down the server (on page 24).

2. Do one of the following:

o Open or remove the tower bezel, as needed ("Open or remove the tower bezel" on page 25).

o Remove the server from the rack (on page 25).

3. Remove the access panel (on page 26).

4. Remove the two T-10 screws from the rear panel, and then remove the rear access panel. Retain the

screws for securing the PCI-X expansion cage.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 143 144

No comments

Hp ProLiant ML350 G6 Server User Manual Page 72