Hp ProLiant ML350 G6 Server User Manual download pdf (Page 62)

Hardware options installation 62

The connector labeled "6LFF"of the mini-SAS Y-cable to the primary hard drive cage.

10. Slide the optional hard drive cage fully into the bay until it clicks, and then install the screws.

CAUTION: Always populate each media bay with either a device or a blank. Proper airflow can

only be maintained when the bays are populated. Unpopulated drive bays can lead to improper

cooling and thermal damage.

11. Connect the common end of the mini-SAS Y-cable to the SAS connector B on the system board.

12. Install any hard drives or blanks ("SAS or SATA hard drive option" on page 52).

13. Install the access panel (on page 27).

14. Do one of the following:

o Close or install the tower bezel, as needed.

o Slide the server back into the rack.

15. Power up the server (on page 24).

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 143 144

No comments

Hp ProLiant ML350 G6 Server User Manual Page 62