HP Value 2D Wireless Scanner User Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
5 Programming the scanner
The scanner is factory-configured with a set of standard default features. After scanning the interface bar
code from the Interfaces section, select other options and customize the scanner through use of the
programming bar codes available in the Programming Reference Guide (PRG). Check the corresponding
features section for your interface, and also the Data Editing and Symbologies chapters of the PRG.
Using programming bar codes
This guide contains bar codes that allow you to reconfigure the scanner. Some programming bar code labels,
like the "Standard Product Default Settings" in this chapter, require only the scan of that single label to enact
the change.
Other bar codes require the scanner to be placed in programming mode prior to scanning them. Scan an
ENTER/EXIT bar code once to enter programming mode; scan the desired parameter settings; scan the
ENTER/EXIT bar code again to accept your changes, which exits programming mode and returns the scanner
to normal operation.
Configure other settings
Additional programming bar codes are available in the PRG to allow for customizing programming features. If
your installation requires different programming than the standard factory default settings, refer to the PRG.
Resetting standard product defaults
Reference the PRG for a listing of standard factory settings. If you aren’t sure what programming options are
in the scanner, or you’ve changed some options and want the factory settings restored, scan the Standard
Product Default Settings bar code below to copy the factory configuration for the currently active interface
to the current configuration.
NOTE: Factory defaults are based on the interface type. Configure the scanner for the correct interface
before scanning this label.
Figure 5-1 Standard Product Default Settings
Using programming bar codes 29
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Comments to this Manuals

No comments