HP EliteDesk 800 65W G4 Base Model Desktop Mini PC User Manual download pdf (Page 34)

7. Remove the screw (2) that secures the WLAN module to the system board, and then grasp the WLAN

module by the sides and pull it out of the socket (3).

NOTE: You may need to use a small tool, such as a pair of tweezers or needle-nose pliers, to

disconnect and connect the antenna cables.

IMPORTANT: Only disconnect the antenna cables from the WLAN module when necessary, such as

when specically replacing the WLAN module or the antenna cables. Disconnecting the antennas from

the module poses the risk that they do not get correctly reconnected. For other components that require

removing the WLAN module, such as the system board, remove the module while leaving the antenna

cables connected and place the WLAN module o to the side while removing and replacing the

components.

To replace the WLAN module, reverse the removal procedures.

26 Chapter 4 Removal and replacement procedures

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 115 116

No comments

HP EliteDesk 800 65W G4 Base Model Desktop Mini PC User Manual Page 34