TheIntegratedLights-Outportonthestorageservercanbeconfigured through the Rapid Startup Wizard
or through the iLO 2 ROM-Based Setup Utility (RBSU). SNMP is enabled and the Insight Management
Agents are preinstalled.
The HP iLO 2 management processor provides multiple ways to configure, update, operate, and manage
servers remotely. The HP ProLiant Storage Server comes preconfigured with iLO 2 default factory settings,
including a default user account and password. These settings can be found on the iLO 2 Default
Network Settings tag found on the front of the ser ver. If iLO 2 is connected to a net work running DNS
and D HC P, you can use it immediately without changing any settings.
For more information on using HP iLO 2, see the HP Integrated Lights-Out 2 User G uide.
To quickly set up iLO 2 using the default settings for iLO 2 Standard and iLO 2 Advanced features,
follow the steps below
1. Ensure that a network cable is connected to the iLO 2 port located on the back of the storage ser ver.
NOTE:
This connection method is easiest when the connection is to a DHC P and DNS supported
network.
2. If you are not using dyna mic DHCP (IP addressing), you will need to input a static IP address by
using the direct attach method and the iLO 2 RBSU.
3. Using the methods described in the HP Integrated Lights–Out 2 User Guide, connect to the iLO 2 port.
NOTE:
To find the default iL O 2 log on settings, see the iLO 2 Default Network Settings card
attached to your server. The default DNS, administrator name, and password needed to
logonwillbeonthiscard.
4. If desire
d, you can change the default user name and password on the administrator account to
your pre
defined selections.
5. Set up your user accou nts, i f using the local accounts feature.
6. Activate iLO 2 a dvanced features by entering a license key from the included ProLiant Essentials
Integrated Lights-Out 2 Advanced Pa ck.
7. Access the H P ProLiant Storage Server using the iLO 2 Remote Console functionality. Log on to
the HP ProLiant Storage Server with the default user name administrator and the password
hpinv
ent. The HP ProLiant Storag e Server Management console star ts automatically.
NOTE:
When t
he Remote Console feature is enabled, you c an get access to the storage server's
login screen.
The Integrated Lights-Out 2 port comes with factory default settings, which the administrator can change.
Administrators may want to add users, change SNMP trap destinations, or change networking settings.
See the HP Integrated Lights-Out 2 User Guide for information about changing these set tings. To obtain
this guide, go to h
ttp://www.hp.com/support/manuals, navigate to the servers section, a nd select
Server managem ent. In the ProLiant Essentials Software section, select HP Integrated Lights-Out 2 (iLO
2) Standard Firmware.
24
Installing and configuring the server
Comments to this Manuals