Hp 245 G3 Notebook PC User Manual download pdf (Page 54)

b. Grasp the edge of the memory module (2), and then gently pull the module out of the

memory module slot.

CAUTION: To prevent damage to the memory module, hold the memory module by the

edges only. Do not touch the components on the memory module.

NOTE: To protect a memory module after removal, place it in an electrostatic-safe

container.

8. Insert a new memory module:

CAUTION: To prevent damage to the memory module, hold the memory module by the edges

only. Do not touch the components on the memory module.

a. Align the notched edge (1) of the memory module with the tab in the memory module slot.

b. With the memory module at a 45-degree angle from the surface of the memory module

compartment, press the module into the memory module slot (2) until it is seated.

c. Gently press the memory module (3) down, applying pressure to both the left and right

edges of the module, until the retention clips snap into place.

CAUTION: To prevent damage to the memory module, be sure that you do not bend the

module.

44 Chapter 8 Maintaining your computer

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 82 83

No comments

Hp 245 G3 Notebook PC User Manual Page 54