HP SmartStream Print Controller for HP Designjet T3500 Production eMFP User Manual download pdf (Page 8)

Getting started

1. Install the software and software licenses. See the installation guide.

2. Create a job in the job preparation pane, which gives you many tools for manipulating and setting up each

job before printing. To create your rst job, select the printer that you want to use, and drag and drop one or

more les onto the job preparation pane (or press to browse for les). At this point, the Preight

Manager checks each le and reports any errors in the le that could aect printing. You can preview pages

in the preview pane. See Job preparation on page 19.

NOTE: The supported le formats are PDF, JPEG, TIFF, HP-GL/2, DWF, as well as SMJ and ZIP les

containing les in any of the preceding formats.

3. Send your job to the printing queue (using the Print job button), where you can monitor its progress. See

Printing on page 46.

NOTE: If you are printing to an HP DesignJet printer, do not close the application or shut down the

computer until your job has printed. See Exit the application while printing on page 49.

4. Conveniently reprint past jobs from the application’s history tab. See History on page 51.

2 Chapter 1 Introduction ENWW

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 82 83

No comments

HP SmartStream Print Controller for HP Designjet T3500 Production eMFP User Manual Page 8