HP EliteDesk 700 G1 Microtower PC User Manual download pdf (Page 19)

6. Open both latches of the memory module socket (1), and insert the memory module into the

socket (2).

NOTE: A memory module can be installed in only one way. Match the notch on the module

with the tab on the memory socket.

Populate the black DIMM sockets before the white DIMM sockets.

For maximum performance, populate the sockets so that the memory capacity is spread as

equally as possible between Channel A and Channel B. Refer to

Populating DIMM sockets

on page 11 for more information.

7. Push the module down into the socket, ensuring that the module is fully inserted and properly

seated. Make sure the latches are in the closed position (3).

8. Repeat steps 6 and 7 to install any additional modules.

9. Replace the computer access panel.

10. Reconnect the power cord and turn on the computer.

11. Lock any security devices that were disengaged when the access panel was removed.

The computer should automatically recognize the additional memory the next time you turn on the

computer.

Installing additional memory 13

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 45 46

No comments

HP EliteDesk 700 G1 Microtower PC User Manual Page 19