HP EliteDesk 700 G1 Microtower PC User Manual download pdf (Page 26)

Removing a slim optical drive

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as compact discs or USB flash drives, from the computer.

3. Turn off the computer properly through the operating system, then turn off any external devices.

4. Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION: Regardless of the power-on state, voltage is always present on the system board

as long as the system is plugged into an active AC outlet. You must disconnect the power cord

to avoid damage to the internal components of the computer.

5. Remove the access panel and front bezel.

6. Disconnect the power cable (1) and data cable (2) from the back of the optical drive.

CAUTION: When removing the cables, pull the tab or connector instead of the cable itself to

avoid damaging the cable.

20 Chapter 2 Hardware upgrades

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 45 46

No comments

HP EliteDesk 700 G1 Microtower PC User Manual Page 26