Hp StoreAll Storage User Manual download pdf (Page 103)

Use the buttons on the panels to modify or delete the selected configuration profile or share. You

can also add another FTP share to the selected configuration profile. Use the Modify FTP Share

dialog box if you need to allow NAT connections on the share.

Managing FTP from the CLI

FTP is managed with the ibrix_ftpconfig and ibrix_ftpshare commands. For detailed

information, see the HP IBRIX 9000 Storage CLI Reference Guide.

Configuring FTP

To configure FTP, first add a configuration profile, and then add an FTP share:

Add a configuration profile:

ibrix_ftpconfig –a PROFILENAME [-h HOSTLIST] [-S SETTINGLIST]

For the -S option, use a comma to separate the settings, and enclose the settings in quotation

marks, such as “passive_enable=TRUE,maxclients=200”. To see a list of available settings

for the profile, use the following command:

ibrix_ftpconfig –L

Add an FTP share:

ibrix_ftpshare -a SHARENAME –c PROFILENAME -f FSNAME -p dirpath -I

IP-Address:Port [–u USERLIST] [-S SETTINGLIST]

For the -S option, use a comma to separate the settings, and enclose the settings in quotation

marks, such as “browseable=true,readonly=true”. For the -I option, use a semicolon to

separate the IP address:port settings and enclose the settings in quotation marks, such as

“ip1:port1;ip2:port2;...”. To list the available settings for the share, use the following

command:

ibrix_ftpshare –L

Managing the FTP configuration

Use the following commands to view, modify, or delete the FTP configuration. In the commands,

use -v 1 to display detailed information.

View configuration profiles:

ibrix_ftpconfig –i -h HOSTLIST [–v level]

Managing FTP from the CLI 103

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 253 254

No comments

Hp StoreAll Storage User Manual Page 103