Hp Insight Management Agents User Manual download pdf (Page 108)

◦ OK—If the thermal temperature status and thermal CPU fan status and thermal System

fan status are all OK.

◦ Unknown—The thermal features are not supported.

Temperature Sensors Information

• Temperature condition—Displays the current temperature condition of the system or client PC.

This value can be:

◦ OK—The temperature is within normal operating range.

◦ Degraded—The temperature is above normal for airflow obstructions. Make sure that the

cover is on.

CAUTION: Do not operate the system with the cover removed. Proper airflow is possible

only when the cover is in place and properly secured.

◦ Failed—The temperature is outside the normal operating range and could permanently

damage the system. The system automatically shuts down to prevent damage to hardware

or data loss.

NOTE: A Failed condition does not occur in a client PC since the power supply for the

client is cut off if thermal condition reaches a permanently damaging level.

◦ Unknown— If the Server Agents or the Server Agent cannot determine the status of the

device, you may need to upgrade your driver software. If you are managing a client with

an unknown temperature status, the client may not support thermal detection.

• Sensor—The number that uniquely specifies the temperature sensor description.

• Location—This specifies the location of the temperature sensor present in the system.

• Temperature—This is the current temperature sensor reading in degrees Celsius.

• Threshold—This is the shutdown threshold temperature sensor setting in degrees Celsius. This

is the temperature at which the sensor is considered to be in a failed state causes the system

to be shutdown.

NOTE: Only the Ambient zone type allows setting of the threshold temperature. Not all

(maybe one or none) sensors can set this value.

• Type—This specifies the type of this instance of temperature sensor. This value can be:

◦ Blowout—If a blowout temperature sensor reaches its threshold, the fan or fans in the

area of the temperature sensor increases in speed in an attempt to reduce the temperature

before a caution or critical threshold is reached.

• Caution—If a caution temperature sensor reaches its threshold, the temperature condition is

set to degraded and the system either continues or shuts down depending on the setting of

the Thermal Degraded Action.

• Critical—If a critical temperature sensor reaches its threshold, the Temperature Condition is

set to failed and the system shuts down.

• Unknown—The Temperature threshold type could not be determined.

108 Agent information

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 164 165

No comments

Hp Insight Management Agents User Manual Page 108