Hp LaserJet 9000 Printer series User Manual download pdf (Page 34)

34 2 Finisher tasks ENWW

Selecting the output location

You can select an output location (bin) through the software

application or through your printer driver. (Where and how you make

selections depends on your program or driver.) If you cannot select an

output location from the program or the driver, set the default output

location from the printer control panel.

To select an output location from the control panel

On the touch screen of the graphical display:

1 Touch MENU.

2 Touch CONFIGURE DEVICE.

3 Touch PRINTING.

4 Touch PAPER DESTINATION.

5 Scroll to the output bin or device you want, and then touch OK.

Your network administrator might have changed the name of the

device. An asterisk (*) appears next to your selection.

On the non-touch screen:

1 Use or to scroll to CONFIGURE DEVICE and press .

2 Use or to scroll to PRINTING and press .

3 Use or to scroll to PAPER DESTINATION and press .

4 Use or to scroll to the output bin or device you want and

press . Your network administrator might have changed the

name of the device. An asterisk (*) appears next to your selection.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 67 68

No comments

Hp LaserJet 9000 Printer series User Manual Page 34