Hp Deskjet 6940 User Manual Page 97

  • Download
  • Add to my manuals
  • Print
  • Page
    / 150
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 96
If you still cannot access the printer's EWS, then follow these steps:
1. Print an HP Report page.
2. Find the printer's IP address.
3. Launch the Internet browser.
Note Use Microsoft Internet Explorer 5.0 or higher or Netscape 4.75 or
higher.
4. Enter the printer's IP address in the address box, then press Enter.
A personal software firewall is blocking communication between the printer and
the computer
The personal software firewall is a security program that protects a computer from
intrusion. However, the personal firewall might block communication between the
computer and the printer.
If you cannot communicate with the printer, try disabling the personal firewall. If you are
still unable to communicate with the printer, then re-enable the firewall.
If disabling the firewall allows you to communicate with the printer, you might want to
assign the printer a static IP address and then re-enable the firewall. To assign the printer
a static IP address, see the network guide that came with the printer.
Printer does not print
Verify the following
Verify the following conditions if the printer is not printing:
The printer is connected to the power source.
The cable connections are secure.
The printer is turned on.
The print cartridges are the correct print cartridges for the printer and are properly
installed.
The paper or other media is correctly loaded in the In tray.
The printer cover is closed.
The rear access door is attached.
Check the printer lights
The printer lights indicate the printer status and alert you to potential problems.
For more information, see Printer lights are on or flashing.
User's guide 95
Page view 96
1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 149 150

Comments to this Manuals

No comments