HP Jetdirect 175x User Manual download pdf (Page 68)

Using the embedded web server

for HP Jetdirect 175x external print server/Internet connector for USB

and HP Jetdirect 310x external print server/Internet connector for USB

HP Jetdirect print servers contain an embedded web server that can be accessed from

a compatible web browser over an intranet. You can use any computer on the

network to access the configuration and management pages for the print server and

the attached network device—the printer or multifunction (MFP or All-in-One)

device. The print server's embedded web server allows you to monitor server and

device status, view and change print server configuration, and use basic scanning

over the network if you have a multifunction (MFP or All-in-One) device.

Compatible versions of web browsers (and HP Web Jetadmin)●

Getting started with the embedded web server●

Directory of pages and features in the embedded web server●

Viewing the embedded web server

Before you can use the embedded web server, the HP Jetdirect print server must be

configured with an IP address.

The print server may already be configured for IP as part of the software

installation; check for its IP address on the configuration page. If it is

not configured, see ways to configure an IP address: overview of IP and

IP addressing.

After an IP address is established on the print server, perform the following steps.

Run a supported web browser.1.

Enter the IP address of the print server as the URL address.

For example: http://192.168.45.39

The Home page will be displayed, as illustrated below.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 201 202

No comments

HP Jetdirect 175x User Manual Page 68