HP Jetdirect 175x User Manual Page 120

  • Download
  • Add to my manuals
  • Print
  • Page
    / 202
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 119
BOOTP/DHCP
Server
Displayed during initialization while the print server attempts to obtain its
TCP/IP configuration from a BOOTP or DHCP server. The temporary address
displayed is 0.0.0.0.
Not Specified the configuration server’s IP address could not be
determined or was set to zero in the response packet.
TFTP
Server
The IP address of the system where the TFTP configuration file is located.
During initialization, the temporary address 0.0.0.0 is displayed.
Not Specified a TFTP server has not been not been set.
Config
File
The name of the print server’s configuration file. The file pathname may be
truncated to fit on rest of the one line allocated.
Not Specified a file was not specified in the BOOTP reply from
the host.
Domain
Name
The Domain Name System (DNS) name of the domain in which the print
server resides (for example, support.company.com). It is not the fully
qualified DNS name because the host printer name is not included (for
example: printer1.support.company.com).
Not Specified a domain name has not been configured on the
print server.
DNS Server
The IP address of the Domain Name System (DNS) server.
Not Specified a DNS server’s IP address has not been
configured on the print server.
WINS
Server
The IP address of the Windows Internet Name Service (WINS) server.
Not Specified a WINS server’s IP address has not been
configured on the print server.
Syslog
Server
The IP address of the syslog server configured on the print server.
Not Specified a syslog server has not been configured.
Idle
Timeout
The timeout value expressed in seconds after which the print server closes an
idle TCP print data connection. Acceptable values are integers between 0 and
3600 seconds. A value of zero turns off the timeout mechanism. The default
value is 270 seconds.
Web
Jetadmin
URL
If the print server is found on the network by HP Web Jetadmin, the URL of
the host system used for HP Web Jetadmin services is displayed. The URL is
limited to two lines and may be truncated.
Not Specified the URL of the HP Web Jetadmin host system
could not be identified or is not configured.
Back to Top
IPX/SPX Protocol Information
Provides the current status and parameter values for the IPX/SPX network protocols.
Message Description
Page view 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 201 202

Comments to this Manuals

No comments