HP 706C User Manual download pdf (Page 72)

 !!



By responding to the

Enter Request:

message at the end of the main

configuration menu with "2" (Set Serial Port Configuration), you may

change the configuration of each serial port (i.e. baud rate, word size,

stop bits, parity, and XON/XOFF). Each port may be configured

individually. This allows Print Master to translate for devices using

different configurations.

Print Master will respond with a menu similar to:

Enter Port Number (5 to 6, 0=Exit), CR:

Type the desired port number followed by <ENTER>. For instance, if

you type "5" and <ENTER>, Print Master will respond with the current

status of Port 5 and a menu of the available options:

Port Baud

Rate

Word

Size

Stop

Bits

Pariity Xon/

Xoff

5 9600 8 1 None Off

Exit/save......1 Set stop bits.....4

Set baud rate..2 Set parity........5

Set word size..3 Set Xon/Xoff......6

Enter request:

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 122 123

No comments

HP 706C User Manual Page 72