1Overview
This chapter includes the following topics:
•
General description, page 13
•
Features, page 13
• Components, page 14
• Status indicators, page 15
•Systemrequirements, page 15
General description
The DS2500 i
s a dual-redundant Fibre Channel (FC) loop storage system used on systems running HP-UX
operating s
ystemsoftware.TheDS2500occupies3EIAunitsinastandard19-inchrack. Upto14
disk drives
can be mounted in the front of the enclosure. Up to 4 DS2500s can be daisy-chained
together to create a storage ring.
Features
The DS2500 disk enclosure provides:
• Redundant power supplies and blowers
Only one operational power supply and one operational blower are required for the DS2500
to function.
• FC disk drives that can be added or replaced with the system on (although the affected file
systems must be taken offline)
• Environmental services sensors that monitor the disk enclosure and provide real-time error
reporting
• High-availability to minimize unplanned downtime
• Customer-replaceable components
Each DS2500 is connected to Host Bus Adapters (HBAs) through two independent Fibre Channel
Arbitrated Loop (FC-AL) buses, also known as loops, to provide no single point of failure (NSPOF). Each
disk drive connects to loop A through I/O module A, and to loop B through I/O module B. Figure 1
shows the maximum configuration of four DS2500s.
The disk enclosure supports high-availability requirements through the following features:
• Hot-pluggable components
• High-capacity, high-speed disks
• Redundant, customer replaceable power supplies and blowers
• Redundant I/O modules
• Support for mirrored disks in the HP-UX environment
• Online firmware upgrades
• Hardware event monitoring and real-time error reporting
2500 Disk System user guide
13
Comments to this Manuals