HP 445942-001 User Manual download pdf (Page 9)

ISCLI reference

Introduction

The HP 10Gb Ethernet BL-c Switch is ready to perform basic switching functions right out of the box. Some

of the more advanced features, however, require some administrative configuration before they can be

used effectively. This guide provides a command reference for the HP 10GbE switch.

The extensive switching software included in the switch provides a variety of options for accessing and

configuring the switch:

• Text-based command line interfaces (AOS CLI and ISCLI) for access via a local terminal or remote

Telnet/Secure Shell (SSH) session

• Simple Network Management Protocol (SNMP) support for access through network management

software such as HP Systems Insight Manager

• A browser-based management interface for interactive network access through a Web browser

The ISCLI provides a direct method for collecting switch information and performing switch configuration.

Use a basic terminal to view information and statistics about the switch, and to perform any necessary

configuration.

This chapter explains how to access the ISCLI to the switch.

Additional references

Additional information about installing and configuring the switch is available in the following guides,

which are available at http://www.hp.com/go/bladesystem/documentation

• HP 10Gb Ethernet BL-c Switch User Guide

• HP 10Gb Ethernet BL-c Switch Command Reference

• HP 10Gb Ethernet BL-c Switch Application Guide

• HP 10Gb Ethernet BL-c Switch Browser-based Interface Reference

• HP 10Gb Ethernet BL-c Switch Quick Setup Instructions

Connecting to the switch

You can access the command line interface in one of the following ways:

• Using a console connection via the console port

• Using a Telnet connection over the network

• Using a Secure Shell (SSH) connection to securely log in over a network

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 198 199

No comments

HP 445942-001 User Manual Page 9