HP 445942-001 User Manual Page 74

  • Download
  • Add to my manuals
  • Print
  • Page
    / 199
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 73
Statistics Commands
74
Table 48 Ethernet statistics for port
Statistics Description
dot3StatsFrameTooLongs
A count of frames received on a particular interface that exceeds
the maximum permitted frame size.
The count represented by an instance of this object is incremented
when the frameTooLong status is returned by the MAC service to
the LLC (or other MAC user).
Received frames for which multiple error conditions obtained are,
according to the conventions of IEEE 802.3 Layer Management,
counted exclusively according to the error status presented to the
LLC.
dot3StatsInternalMacReceiveErrors
A count of frames for which reception on a particular interface fails
due to an internal MAC sublayer receive error.
A frame is only counted by an instance of this object if it is not
counted by the corresponding instance of the
dot3StatsFrameTooLongs object, the
dot3StatsAlignmentErrors object, or the
dot3StatsFCSErrors object.
The precise meaning of the count represented by an instance of this
object is implementation specific. In particular, an instance of this
object may represent a count of received errors on a particular
interface that are not otherwise counted.
Interface statistics
Use the following command to display the interface statistics of the selected port:
show interface port <port number> interface-counters
Command mode: All
Interface statistics for port 1:
ifHCIn Counters ifHCOut Counters
Octets: 51697080313 51721056808
UcastPkts: 65356399 65385714
BroadcastPkts: 0 6516
MulticastPkts: 0 0
Discards: 0 0
Errors: 0 21187
The following table describes the interface (IF) statistics for a selected port:
Table 49 Interface statistics for port
Statistics Description
Octets—IfHCIn
The total number of octets received on the interface, including framing characters.
UcastPkts—IfHCIn
The number of packets, delivered by this sublayer to a higher sublayer, which were
not addressed to a multicast or broadcast address at this sublayer.
BroadcastPkts—IfHCIn
The number of packets, delivered by this sublayer to a higher sublayer, which were
addressed to a broadcast address at this sublayer.
Page view 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 198 199

Comments to this Manuals

No comments