HP 445942-001 User Manual download pdf (Page 168)

Configuration Commands

168

VRRP Interface configuration

These commands are used for configuring VRRP authentication parameters for the IP interfaces used with

the virtual routers. The interface number represents the IP interface on which authentication parameters

must be configured.

The following table describes the VRRP Interface Configuration commands.

Table 152 VRRP Interface Configuration commands

Command Description

interface <1-249>

authentication

{password|none}

Defines the type of authentication that will be used: none (no authentication), or

password (password authentication).

Command mode: Router VRRP

interface <1-249>

password <password>

Defines a plain text password up to eight characters long. This password will be

added to each VRRP packet transmitted by this interface when password

authentication is chosen.

Command mode: Router VRRP

no interface <1-249>

Clears the authentication configuration parameters for this IP interface. The IP

interface itself is not deleted.

Command mode: Router VRRP

show ip vrrp interface

<1-249>

Displays the current configuration for this IP interface’s authentication parameters.

Command mode: All except User EXEC

VRRP Tracking configuration

These commands are used for setting weights for the various criteria used to modify priority levels during

the master router election process. Each time one of the tracking criteria is met, the priority level for the

virtual router is increased.

The following table describes the VRRP Tracking Configuration commands.

Table 153 VRRP Tracking Configuration commands

Command Description

tracking-priority-increment

virtual-routers <0-254>

Defines the priority increment value (0 through 254) for virtual routers in

master mode detected on this switch. The default value is 2.

Command mode: Router VRRP

tracking-priority-increment

interfaces <0-254>

Defines the priority increment value (0 through 254) for active IP

interfaces detected on this switch. The default value is 2.

Command mode: Router VRRP

tracking-priority-increment

ports <0-254>

Defines the priority increment value (0 through 254) for active ports on the

virtual router’s VLAN. The default value is 2.

Command mode: Router VRRP

show ip vrrp tracking-

priority-increment

Displays the current configuration of priority tracking increment values.

Command mode: All except User EXEC

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 198 199

Comments to this Manuals

No comments

HP 445942-001 User Manual Page 168

Comments to this Manuals

Related products and manuals for Network switches HP 445942-001