HP TippingPoint Next Generation Firewall Series Installation Manual download pdf (Page 23)

Next Generation Firewall Hardware Specification and Installation Guide 11

• Flashing Yellow — Hardware problem detected. Software running normally.

• Off — Appliance power is off.

Fans and Power Supplies

The S3000 Series appliances include two power supplies and three cooling fans. These components are

hot-pluggable. For more information about these components, see ”Power Supply and Fan Modules” on

page 33.

External Storage Card

The S3000 Series appliances include a CFast card slot. The external storage card stores system logs,

snapshots, and other system data. The card can be removed and inserted while the appliance is running;

however, to do so, you must issue the appropriate unmounting, mounting, and preparation commands in

the command line interface (CLI). Refer to ”Using the External CFast Storage Card” on page 37 or the CLI

Reference for command syntax.

For more information about configuring the external CFast card, refer to ”Using the External CFast Storage

Card” on page 37.

Ports

All NGFW Appliances, including the S3000 Series appliances, are equipped with eight copper ports in

addition to the console and management ports shown in the following figure:

Figure 3-3 Management and Console Ports

1 1 RJ-45 serial console port

2 1GbE copper management port

3 Link LED

4 Activity LED

The management port LEDs indicate link and activity state, as described in the following table.

Eight 1Gbe SFP fiber ports are also available on the S3000 Series appliances.

Table 3-1 Management Port LED Descriptions

LED Type Color Description

Link Green Link is active at 1000Mbps.

Off Link is inactive, or is active at 10Mbps or 100Mbps.

Activity Blinking amber Data traffic is passing.

Off No traffic is passing.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 53 54

No comments

HP TippingPoint Next Generation Firewall Series Installation Manual Page 23