HP TippingPoint Next Generation Firewall Series Installation Manual download pdf (Page 18)

6 HP TippingPoint S1000 Series

Chassis Back Panel

The following illustration shows a rear-panel view of an S1050F appliance.

Figure 2-2 S1050F Appliance Back Panel

1 Fans (3)

2 AC power supply

3 AC power connector

4 Power switch

Chassis Features

The Chassis features include the following elements:

•”Power Switch and Power Indicator” on page 6

•”System Status Indicator” on page 6

•”Alert Indicator” on page 6

•”Fans and Power Supplies” on page 7

•”External Storage Card” on page 7

•”Ports” on page 7

Power Switch and Power Indicator

The power switch is located on the right side of the back panel. The power indicator on the front panel

indicates the current power status of the appliance.

• No light — Appliance is powered off.

• Green — Appliance is powered on.

System Status Indicator

The System Status indicator is located on the right side of the front panel and indicates the current

operating status of the appliance.

• Flashing Green — Appliance is booting and is not yet ready to inspect traffic.

• Flashing Green/Yellow — Appliance is booting and BIOS or software is updating.

• Solid Green — Appliance is running in a healthy state.

• Solid Yellow — Appliance is running but has a health rating below the acceptable threshold.

Alert Indicator

The Alert indicator is located on the right side of the front panel and indicates the current status of the

software processes and the hardware.

• Solid Green — Both the hardware and the software processes are running normally.

• Solid Yellow — System is booting. If the solid yellow indicator remains after startup, a software problem

has been detected. Hardware status is undefined.

• Flashing Yellow — Hardware problem detected. Software running normally.

• Off — Appliance power is off.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 53 54

No comments

HP TippingPoint Next Generation Firewall Series Installation Manual Page 18