HP TippingPoint Next Generation Firewall Series Installation Manual download pdf (Page 20)

8 HP TippingPoint S1000 Series

WARNING! Do not attempt to install a DC power supply into an NGFW Appliance. The NGFW

Appliance does not contain the grounding capability for safe installation of a DC power supply. Bodily

harm and damage to the system could result.

Cabling Requirements

The S1050F appliance ships with the following cables:

• One AC power cable

• Null modem cable for the serial console management port (DB-9 to RJ-45) shown in Figure 2-3 on

page 7.

Technical Specifications

The S1050F appliance has the following specifications:

Installing the Appliance

To install and complete installation setup of the appliance, see ”Installing the NGFW Appliance” on

page 21.

Table 2-2 S1050F Appliance Hardware Specifications

Specification Description

Dimensions

(unpackaged)

1.73 in (H) x 16.78 in (W) x 17.72 in (D)

(4.40 cm x 42.62 cm x 45.00 cm)

Weight 15.28 lbs (6.93 kg)

Power

Requirements

AC: Voltage 100 – 240; Current 4 – 2 A; Frequency 50 – 60 Hz

The appliance’s maximum power consumption is 142 W.

Service Provider

operating

requirements

Temperature: 32 – 104° F (0 – 40° C) — Operating

Temperature: -4 – 158° F (-20 – 80° C) — Storage

Altitude: No degradation up to 10,000 feet (3048 m)

Humidity: 5% to 95% (non-condensing)

External interfaces • 1 – 1GbE copper management port

•1 – RJ-45 console port

• 8 – 1GbE copper ports

• 1 external storage card drive

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 53 54

No comments

HP TippingPoint Next Generation Firewall Series Installation Manual Page 20