HP Z800 Specifications Page 183

  • Download
  • Add to my manuals
  • Print
  • Page
    / 304
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 182
Installing a PCIe card
1.
Disconnect power from the workstation (see
Predisassembly procedures on page 77).
2.
Remove the side access panel (see
Removing the side access panel on page 79).
3.
Remove the expansion card support (see
Removing the expansion card support on page 82).
4.
Select the desired expansion card slot for the PCIe card. See
Choosing an expansion card slot
on page 168 for help in selecting a slot.
5.
Raise the rear retention clamp by lifting the metal bar or the green lever (1), as shown in the
following figure.
Figure 5-96 Removing the slot cover
TIP: Grasp the slot cover between two fingers—one from the inside of the chassis, and one from
the outside.
6.
Remove the PCI slot cover by pulling it up, out of the chassis (2).
ENWW
Removing and installing components
171
Page view 182
1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 303 304

Comments to this Manuals

No comments