Manually printing on the second side of a page is available when you are using the HP PCL 6 print
driver.
Select the paper type that corresponds to the paper that you are using for the print job. The following
paper types have a different print modes when you manually print on the second side:
●
Plain
●
Preprinted
●
Letterhead
●
Prepunched
●
Bond
●
Recycled
●
Colored
●
Rough
NOTE: To make the Print on Both Sides (manually) check box available in the document
options, select the Allow Manual Duplexing option on the Device Settings tab in the print-driver
Properties tab set.
Cardstock paper can be manually printed on the second side, but no change occurs to the print mode.
Transparencies and labels should never be manually printed on the second side.
To print a multiple-page document, follow these steps:
1. Select the Print on Both Sides (manually) check box.
2. Click the OK button. The even-number pages of the document print.
3. When the control panel shows the Manually Feed message, insert the stack of paper (on which
the even-number pages have been printed) as indicated in the following figure.
ENWW
HP LaserJet software components for Windows®
41
Comments to this Manuals