HP ZBook 15 Base Model Mobile Workstation User Manual download pdf (Page 104)

Display assembly

NOTE: The DreamVision display assembly is spared as a whole unit assembly only. The LED display

assembly is spared at the subcomponent level only. For more LED display assembly spare part

information, see the individual removal subsections.

Description Spare part number

15.6-in, FHD, UWVA, DreamVision display assembly equipped with a webcamera 735965-001

15.6-in, FHD, UWVA, DreamVision display assembly not equipped with a webcamera 735964-001

To remove the display assembly and access the LED display assembly subcomponents, follow

these steps:

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the battery (see

Battery on page 50), and then remove the following components:

a. Service cover (see

Service cover on page 51)

b. Hard drive (see

Hard drive on page 52)

c. Optical drive (see

Optical drive on page 54)

d. Keyboard (see

Keyboard on page 62)

e. Top cover (see

Top cover on page 71)

Remove the display assembly:

1. Close the computer.

2. Turn the computer upside down, with the rear toward you.

3. Make sure that the WWAN antenna cables are disconnected from the WWAN module (see

WWAN module on page 56).

4. Make sure that the WLAN antenna cables are disconnected from the WLAN module (see

WLAN

module on page 59).

96 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 159 160

No comments

HP ZBook 15 Base Model Mobile Workstation User Manual Page 104