HP Pavilion DV3Z-1000 Technical Information download pdf (Page 59)

Fingerprint reader board

Description Spare part number

Fingerprint reader board (includes fingerprint reader board cable) 506962-001

Before removing the fingerprint reader board, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 32).

5. Remove the following components:

a. Hard drive (see

Hard drive on page 38)

b. Optical drive (see

Optical drive on page 35)

c. Keyboard and switch cover (see

Keyboard and switch cover on page 40)

d. Display assembly (see

Display assembly on page 43)

e. Top cover (see

Top cover on page 49)

Remove the fingerprint reader board:

1. Turn the top cover upside down, with the front toward you.

2. Remove the two Phillips PM2.0×2.0 screws (1) that secure the fingerprint reader board to the top

cover.

3. Remove the fingerprint reader board (2) from the top cover.

Reverse the above procedure to install the fingerprint reader board.

Component replacement procedures 51

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 113 114

No comments

HP Pavilion DV3Z-1000 Technical Information Page 59