HP 3PAR User Manual download pdf (Page 24)

To ensure that your HP 3PAR StoreServ Storage system remains available if a path fails, connect

the host system to the HP 3PAR storage system using multiple paths.

Before using SmartStart to configure Fibre Channel connections, do one of the following:

• If you are connecting the host and HP 3PAR StoreServ Storage systems directly, verify that the

appropriate cabling is in place between the host system and the HP 3PAR storage system.

• If you are using a SAN:

Verify that the appropriate cabling is in place between the host system and the fabric

and between the HP 3PAR storage system and the fabric.

◦

◦ Verify that the fabric zones comply with the zoning guidelines in the HP 3PAR Windows

Server 2012 and Windows Server 2008 Implementation Guide (see Setting Up and

Zoning the Fabric).

To access this document, go to the HP 3PAR StoreServ Storage site and click the Support

link for your product:

http://www.hp.com/go/3par

NOTE: SmartStart will configure the port mode depending on the type of connectivity that you

configured.

Configuring Fibre Channel Connections

To access the Fibre Channel Host Configuration wizard and configure Fibre Channel connections,

click the Configure FC host link in the SmartStart wizard.

For more information, see “Configure the Fibre Channel Host” (page 25).

24 Configure the Hosts

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 62 63

No comments

HP 3PAR User Manual Page 24