HP zx6000 Installation Guide download pdf (Page 16)

Setting Up and Using Your System

System Description

Chapter 116

Accessory Card Slots Workstation: One AGP Pro 4X 32-bit slot supporting 1.5V AGP cards

(≤50W) - optional.

Three 64-bit 133MHz PeripheralComponent Interconnect (PCI-X) slots,

supporting all bridges and multifunction PCI-X devices. All three PCI-X

slots comply with PCI-X Speciﬁcation.

Server: Four 64-bit 133MHz Peripheral Component Interconnect

(PCI-X) slots.

NOTE: Hewlett Packard has done extensive testing of PCI, PCI-X, and

AGP cards to ensure proper operation with this system. A full list of HP

supported cards is available at

http://www.hp.com/support/itanium_tpl. If you are considering using a

non-supported card, please review the errata notices at

http://www.hp.com/support/itanium_ipf. These will inform you of any

issues HP is aware of and help ensure that your system remains trouble

free.

Optical Drive Models include either a slimline 8x DVD-ROM/CD-RW combo drive or a

slimline 8x DVD-ROM drive.

System Board Connectors

• One ATA-100 capable IDE connector

• Main power supply connector (plus a redundant power connector)

• Main chassis fan connectors

• Processor fan connectors

• Status panel connector

• Three PCI-X connectors and one AGP card connector for zx6000

and four PCI-X connectors for rx2600 systems. The PCI-X

connectors are 64-bit, 133MHz slots that support all bridges and

multi-function PCI and PCI-X devices.

• Management card (optional)

• Two internal SCSI connectors and one external connector

Management Card

(optional)

• 25-pin Serial connector (with console/remote/USP extensions -

requires breakout cable)

• 15-pin VGA connector

• 10/100 Management LAN

Feature Description

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 67 68

No comments

HP zx6000 Installation Guide Page 16