HP 300i Service Manual download pdf (Page 28)

Performance Verification

2-4

Internal Circuitry Testing of PageWriter 200/200i/300pi

These tests are performed on the internal circuitry:

•Memory

• Gate Array

• Front-End Interface

• Serial Interface

Each test is described detail later in this chapter.

When testing the internal circuitry of the PageWriter 200/200i/300pi, the numbers 1

through 9 and the characters A through D are displayed one at a time beginning with

number 1. Each number represents a particular test. If the test fails, the character X is

placed after the test number, for example, 3X. The test descriptions below are listed in the

order the tests are performed.

Table 2-3 PageWriter 200/200i/300pi Test Numbers

Test Number Test Name Character Displayed on Page-

Writer 200/200i/300pi

Comments

1ROM-1 1 OK

2 ROM-2 2 Passes for 300pi, 200i, and 200 with

software revision A.05.06 or later.

3 ROM-X1 3 Passes for Options #A05 and #A10

only.

4 ROM-X2 4 Passes for Options #A05 and #A10

only.

5RAM 5 OK

6 NVRAM 6 OK

7GA 7 OK

8ECG FE 8 OK

9 SIO 9 Passes for Options #A05 and #A10

only.

A REMOTE A For future use - normally fails

B MODEM B Passes for Options #A05 and #A10

only, with modem or test tool

attached

C FLASH1 C Passes for Options #A05 and #A10

only

D FLASH2 D For future use - normally fails

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 163 164

No comments

HP 300i Service Manual Page 28