HP -PB 10 User Manual download pdf (Page 38)

38 Chapter2

Conﬁguring Network Connectivity Using SAM

Step 1: Conﬁguring Network Connectivity

Internet Addresses window.

Proceed to step 5 if a gateway is not required for this remote

connection.

SAM displays ﬁelds for entering gateway information if a gateway

is required for this remote system connection. Use the SAM

online help system for information about gateways.

5. Activate the OK button to enable your system to communicate with

this system and return to the System-to-System Connectivity object

list.

SAM updates the object list to include the remote system you

conﬁgured.

NOTE You can modify or remove remote systems and modify default gateways

by highlighting the Remote System Name from the object list and

choosing Modify, Remove, or Modify Default Gateway from the “Actions”

menu.

6. Choose Exit from the “File” menu.

7. At the Networking Communications window, choose Exit SAM from

the “File” menu to leave SAM.

8. Verify remote system conﬁguration.

a. View the list of remote systems you can communicate with using a

symbolic name by typing the following command at the HP-UX

prompt:

more /etc/hosts

b. View the conﬁgured destinations reached through gateways and

the gateways used to reach those destinations by typing the

following command at the HP-UX prompt:

netstat -r

To verify that you can communicate with a remote system via the

10/100Base-TX product, return to chapter 1, “Step 8: Verify the

Installation.”

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 111 112

No comments

HP -PB 10 User Manual Page 38