HP F4210 User Manual download pdf (Page 199)

Make sure you have the following materials available:

• Dry foam rubber swabs, lint-free cloth, or any soft material that will not come apart

or leave fibers.

TIP: Coffee filters are lint-free and work well for cleaning print cartridges.

• Distilled, filtered, or bottled water (tap water might contain contaminants that can

damage the print cartridges).

CAUTION: Do not use platen cleaners or alcohol to clean the print cartridge

contacts. These can damage the print cartridge or the product.

To clean the print cartridge contacts

1. Turn on the product and open the print cartridge door.

The print carriage moves to the far right side of the product.

2. Wait until the print carriage is idle and silent, and then unplug the power cord from

the back of the product.

3. Lightly press down on the print cartridge to release it, and then pull it towards you

out of the slot.

NOTE: Do not remove both print cartridges at the same time. Remove and

clean each print cartridge one at a time. Do not leave a print cartridge outside

the HP All-in-One for more than 30 minutes.

4. Inspect the print cartridge contacts for ink and debris buildup.

5. Dip a clean foam rubber swab or lint-free cloth into distilled water, and squeeze

any excess water from it.

6. Hold the print cartridge by its sides.

Errors 197

Troubleshooting

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 219 220

No comments

HP F4210 User Manual Page 199