HP F4210 User Manual download pdf (Page 112)

If this did not solve the issue, try the next solution.

Solution 5: Check the cable connections to the product

Solution: If the product is not properly connected to the computer, communication

errors can occur. Try the following:

If the connections are secure, and nothing has printed several minutes after you sent

a print job to the product, check the status of the product. In the HP Photosmart

Software, click Settings, and then click Status.

For more information, see:

“

After setting up the product, it does not print” on page 81

Cause: The computer was not communicating with the product.

If this did not solve the issue, try the next solution.

Solution 6: Make sure that the product is turned on

Solution: Look at the On button located on the product. If it is not lit, the product is

turned off. Make sure the power cord is firmly connected to the product and plugged

into a power outlet. Press the On button to turn on the product.

Cause: The product was turned off.

If this did not solve the issue, try the next solution.

Solution 7: Restart the product

Solution: Turn off the product, and then unplug the power cord. Plug the power

cord back in, and then press the On button to turn on the product.

Cause: The product experienced an error.

If this did not solve the issue, try the next solution.

Chapter 12

110 Troubleshooting

Troubleshooting

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 219 220

No comments

HP F4210 User Manual Page 112