HP H35000 User Manual Page 42

  • Download
  • Add to my manuals
  • Print
  • Page
    / 124
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 41
2-10 Load and Print on Rigid Media
Load and Print on
Rigid Media
1. If loaded, unload any roll-fed media.
2. If necessary, slide the roll-fed media edge holders out of the
way of the media path.
3. Open the input and output media tables, and unfold and lock
the legs into position. For longer media, pull out the table
extension. For longer, lightweight media (such as Fome-
Cor), pull out the media supports.
4. Perform the Configure Media process (see “Configure
Media” on page 2-6), then press the ! (Proceed) key on the
control panel.
The Select Media Length menu appears.
5. Select a predefined media length on the control panel, or
select Input Manually and type in the length.
6. The printer displays a message telling you that your
changes are being saved.
7. Press the ! (Proceed) key on the control panel.
If the printer’s current head height off the media is different
from the Media Wizard’s head height setting for the selected
media, the printer prompts you to change one or the other.
Pressing Yes uses the value from the wizard, pressing
No uses the printer’s current head height, pressing
Change Head Height allows you to change the printer’s
current head height.
Fig. 2-2. Rigid media tables with extensions and supports
Page view 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 123 124

Comments to this Manuals

No comments