HP H35000 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 124
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
1-2 Operating Requirements
Operating
Requirements
Choose a location for the printer before you unpack it. Keep the
following requirements in mind:
Electrical Use the supplied power cord. Plug it directly into a grounded
electrical outlet. Do not lengthen the power cord with an
extension cord; the resulting drop in voltage could damage
the printer.
Make sure the line voltage meets the requirements: See
Appendix A, Technical Specifications, for details.
To maintain vacuum to the printheads during printer power-
down or unexpected power outages, use the auxiliary 24 volt
power supply (included in the accessory kit with universal
power adapters). Connect the 24 VDC jack on the vacuum/
pressure assembly to either of two options:
1. UPS — customer-supplied uninterruptable power sup-
ply, output 100-240 VAC, 50/60 Hz, minimum of 15 watts
of power, provides battery backup to the vacuum system
in the event of a power failure.
2. Wall outlet — 100-240 VAC, 50/60 Hz, provides tem-
porary power to the vacuum system when it is necessary
to power down the printer for service. See Appendix A,
Technical Specifications, for details.
Connect printer to its own electrical circuit. Do not connect
the RIP, auxiliary power supply, or UPS into the same circuit
as the printer.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 123 124

Comments to this Manuals

No comments