HP 14-b062LA Technical Information download pdf (Page 75)

2. Remove the heat sink. If you have an UMA graphics heat sink, go to step c.

a. Loosen all of the captive screws (1) and (2) and then lift the switchable discrete graphics

heat sink (3) from the system board.

CAUTION: To prevent damage to the cooling tubes, do not lift the assembly by the

cooling tubes. The tubes bend easily.

b. Thoroughly clean the thermal connections (1), (3) on the system board and the heat sink

(2), (4) before replacing a heat sink onto a system board. Continue to step 3.

Component replacement procedures 67

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 109 110

No comments

HP 14-b062LA Technical Information Page 75