HP Modular Cooling System User Manual download pdf (Page 62)

Specifications 62

Thermal and air flow performance

Maximum thermal and air flow performance

parameters

Specifications

Air temperature—inlet to rack-mounted components 25ºC (68ºF)

Chilled water temperature 7º–10°C (45º–50°F)

Total rack-mounted component air flow 2,600 cfm or less at 0 or more pressure drop

across the rack-mounted components

Chilled water flow rate 21 gal/min

Chilled water pressure differential at flow needed to

meet thermal specifications

2.0 bar delta pressure

Heat lost to room approximately 10% maximum depending on

the MCS settings and room temperature

Heat transferred to cooling fluid 35 kW maximum

Environmental specifications

Features Specifications

Operating temperature 5ºC to 52ºC (41ºF to 95ºF)

Non-operating temperature 0ºC to 60ºC (32ºF to 140ºF)

Transit temperature -30ºC to 60ºC (-22ºF to 140ºF), up to 72 hours

Storage temperature -20ºC to 60ºC (-4ºF to 140ºF)

Operating humidity 20 to 80% relative humidity (non-condensing)

Non-operating humidity 5 to 95% relative humidity (non-condensing)

Operating altitude -76.2 to 3,048 m (-250 to 10,000 ft)

Non-operating altitude -76.2 to 9,144 m (-250 to 30,000 ft)

HP 10642 G2 Rack specifications

U height Width Depth Dynamic load (gross) Static load

42U 600 mm

(23.82 in)

1,000 mm

(39.37 in)

907.18 kg (2,000 lb) 907.18 kg (2,000

lb)

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 83 84

No comments

HP Modular Cooling System User Manual Page 62