Hp C737990900 User Manual Page 168

  • Download
  • Add to my manuals
  • Print
  • Page
    / 174
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 167
168 glossary
Ultra2 SCSI can transfer data at up to 80 MB/s wide, using a cable of up to
25 meters total length for a single device, or up to 12 meters for two or more
devices (it is also known as “Fast40”).
Ultra3 or Ultra160 can transfer data at up to 160 MB/s wide. Cable lengths
are as for Ultra2.
Ultra4 or Ultra320 will transfer at up to 320 MB/s.
Ultra SCSI supports both SE and LVD interfaces. In normal situations, slower
devices can coexist with faster devices, and narrow devices can be used on the
same SCSI bus as wide devices using a suitable adapter.
HP’s Generation 1 Ultrium drives are Ultra2, wide SCSI-3 compatible devices.
They can be used with both LVD and SE host bus adapters.
Generation 2 Ultrium drives are Ultra160, wide SCSI-3 compatible.
sense data Data returned after the execution of a SCSI command, telling the host whether
the transaction was successful, and if not, what went wrong.
sequential access Sequential access devices store data sequentially in the order in which it is
received. Tape devices are the most common sequential access devices.
Devices such as disk drives are direct access devices, where data is stored in
blocks, not necessarily sequentially. Direct access allows for speed of retrieval,
but is significantly more costly.
single-ended see
SCSI
spacing Spacing is moving along the tape over a specified number of blocks or
filemarks, or to EOD, in order to find data quickly.
sub-data set One sixteenth of a
data set (25272 bytes)
synchronous see
data transfer phase
TapeAlert A set of 64 flags is held in the TapeAlert log that indicate faults or predicted
faults with the drive or the media. By reading this log, host software can inform
the user of existing or impending conditions, and can, for example, advise the
user to change the tape.
vendor-unique The addition of commands to SCSI that are not included in the standard.
Page view 167
1 ... 167 168 169 170 171 172 173 174

Comments to this Manuals

No comments