HP A1630n User Manual download pdf (Page 46)

40 Getting Started Guide

Configuring the Realtek HD Sound Effect Manager

1 Click the Audio I/O tab.

2 Select the option describing the number of speakers in your system — for

example, 7.1 speakers.

3 Only connectors being used are shown; if the connector is not shown it means

that it is not used for the selected speaker configuration.

4 Click OK.

To hear DVD movies recorded with multichannel audio from all speakers, change

the audio properties for the DVD player software program to match your speaker

configuration (if your DVD program supports more than two channels).

To use a microphone or set up the PC for recording, see “Configuring sound for

recording with the Realtek HD Sound Effect Manager” on page 40.

To use Multistreaming Audio, see “Configuring multistreaming audio” on page 41.

Configuring sound for recording with the Realtek HD

Sound Effect Manager

The microphone connector is ready to use for recording sound. If you want to use

another connector for recording, such as the Digital Audio In connector, use these

steps to select it.

1 Click Start on the taskbar, click Control Panel, Sounds, Speech, and

Audio Devices, and then select Realtek HD Sound Effect Manager.

2 Click the Mixer tab.

3 In Record click the drop-down list. Choose:

• RealTek HD Digital Input to use the digital audio in connector (select

models only).

• Line in/Mic in to use the Audio Line In (In) or the Microphone (Mic)

connectors.

4 Click OK to close the window.

NOTE: The front pink and green connectors can be retasked to perform other audio

functions; refer to “Retasking front panel audio connectors with the Realtek HD

Sound Effect Manager” on page 41.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 119 120

No comments

HP A1630n User Manual Page 46