HP A1630n User Manual download pdf (Page 40)

34 Getting Started Guide

To connect digital audio speakers:

1 Turn off the PC.

2 Connect the digital input on the digital speakers or a digital audio system to the

orange Digital Out connector that matches the back of your PC:

• Type 3 is three connectors

• Type 6 is six connectors

• Type S is a sound card connector

3 Turn on the PC.

4 Plug in the speaker system power.

5 Turn on the speaker system.

6 After the speakers are connected to the PC, configure the audio software for

sound output for your PC model:

• Audio card with digital output and type 3 connectors: See “Configuring

audio output with Multi-channel Sound Manager” on page 35. Follow the

instructions to enable digital audio output.

• Audio card with digital output and 6 connectors: See “Configuring audio

output with Sound Effect Manager” on page 37. Digital audio output is

already enabled as the default.

After connecting the speaker system to the PC, configure the sound software.

Step 2: Configuring the Sound

Software

Follow these steps after you have installed and connected the speakers to configure

the speakers using the sound software. You can configure your speaker’s audio

output with the following software. Use the software that applies to your PC model:

• Multi-channel Sound Manager (type 3 connectors)

• Sound Effect Manager (type 6 connectors)

• Realtek HD Sound Effect Manager (multistreaming audio)

NOTE: Always turn on the PC before you turn on the speaker system.

DIGITAL

AUDIO OUT

DIGITAL

AUDIO OUT

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 119 120

No comments

HP A1630n User Manual Page 40