HP A1630n User Manual download pdf (Page 44)

38 Getting Started Guide

Using the Audio Wizard in the Sound Effect Manager

The Sound Effect Manager Audio Wizard can help you connect front-panel audio.

To use the Audio Wizard:

1 Turn on the PC.

2 Click Start on the taskbar.

3 Choose Control Panel.

4 Click Sounds, then Speech and Audio Devices (or Sounds and Audio

Devices).

5 Click Sound Effect Manager. The window opens.

6 Click Audio Wizard. A window opens that shows the connector panel on the

front of the PC.

7 Place a check in the Enable jack detection check box to enable the wizard.

8 Connect the speaker system audio cable plugs into the connectors on the front

of your PC. The panel display highlights a cable that is properly inserted in a

connector.

9 Close the window.

Retasking front-panel connectors with Sound Effect

Manager

With the Audio Wizard enabled, both the microphone connector and the

headphones connector on the front of the PC can be retasked to perform a different

audio function. These two connectors are universal audio jacks. When you plug in a

cable, the wizard asks you to select the function for the cable from a list, and then it

sets the universal audio jack to perform as the selected function. The functions are:

• Stereo Speaker (Out)

• Microphone (In)

• Headphone (In)

• Audio Line In

To retask front-panel connectors:

1 Follow steps 1 through 7 of the procedure, “Using the Audio Wizard in the

Sound Effect Manager” on page 38.

2 When you plug in a cable, the wizard asks you to select the device you

plugged in from a list.

3 Close the window.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 119 120

No comments

HP A1630n User Manual Page 44