HP Moonshot 1500 Chassis User Manual Page 15
- Page / 189
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Table 5 Moonshot virtual management controller functions (continued)
Applicable Virtual Management ControllerDescriptionFunction
NodeCartPower
Supply
ChassisZone
The SDR Repository must be accessible via the
system interface. If an IPMB is provided, the SDR
Repository must be readable via that interface as
well. SDR update via the IPMB interface is optional.
SDR Repository access when the system is powered
up or in ACPI ‘S1’ sleep is mandatory, but access
when the system is powered -down or in a >S1
sleep state is optional.
xxxxxThe IPMB is highly recommended, but optional. The
MC must provide the system interface to the IPMB.
IPMB Interface
If an IPMB is imp lemented, at least one of the
specified IPMB connectors must be provided. Refer
to the IPMB Protocol specification for connector
definition. In addition the MC must implement a
message channel that allows messages to be sent
from the IPMB to the system interface, and
vice-versa, and any other mandatory IPMB support
functions and commands.
xThe MC must provide the standardized Watchdog
Timer interface, with support for system reset action.
Watchdog
Timer
Certain functions within the Watchdog Timer are
optional. Refer to the sections on the Watchdog
Timer for information.
xxThe MC must implement an Event Receiver function
and accept Event Messages via the system interface.
Event Receiver
If an IPMB is provided, the Event Receiver function
must also accept Event Messages from the IPMB.
Event Receiver operation while the system is
powered up or in ACPI ‘S1’ sleep is mandatory,
but operation when the system is powered down or
in a >S1 sleep state is optional.
xxThe MC must provide a System Event Log interface.
The event log must hold at least 16 entries. SEL
SEL Interface
access must be provided via the system interface.
The SEL must be fully accessible via all mandatory
SEL commands through all supported interfaces to
the MC whenever the system is powered up or in
ACPI 'S1' sleep state. SEL read access is always
mandatory whenever the MC is accessible, and
through any interface that is operational, regardless
of system power state.
xxxxxThe MC must provide a logical Primary FRU
inventory device , accessible via the Write- and
FRU Inventory
Read FRU Data commands. The FRU
Inventory Device Info command must also
be supported. It is highly recommended that all other
management controllers also provide a Primary FRU
inventory device. (This was optional in IPMI v1.0.)
xxxxxThe initialization agent function is one where the
MC initializes event generation and sensors both
Initialization
Agent
internally and on other management controllers
according to initialization settings stored in the SDR
for the sensor.
15
- Abstract 1
- Contents 3
- 4 Contents 4
- Contents 5 5
- 6 Contents 6
- Overview 7
- Sensor Data Model 7
- Sensor type code 8
- SDR repository 10
- Standardized timers 12
- Special timestamp values 13
- 4 IPMItool 18
- Interfaces 19
- Features 20
- Inventory 22
- Chassis management 22
- Synopsis 22
- Description 23
- 5 Command specification 25
- Global commands 29
- Cold reset command 32
- Warm reset command 33
- Get self test results command 33
- Get ACPI power state command 34
- Clear message flags command 37
- Get message flags command 38
- Get message command 39
- Send message command 42
- ◦ version 5 SHA1 hash 44
- ◦ 0h = ASCII+Latin1 47
- ◦ 1h = UTF-8 47
- ◦ 2h = UNICODE 47
- ◦ All other = Reserved 47
- Close session command 57
- Get session info command 57
- Get AuthCode command 59
- Set channel access command 60
- Get channel access command 62
- Get channel info command 63
- Set user access command 65
- Get user access command 66
- Get user name command 68
- Set user name command 68
- Set user password command 69
- Activate payload command 71
- ◦ [0] — Reserved 73
- ◦ 1b = Test mode enabled 73
- IPMI LAN Device Commands 83
- MC watchdog timer commands 96
- Watchdog timer event logging 97
- Pre-timeout interrupt 98
- Reset watchdog timer command 98
- Set watchdog timer command 98
- Get watchdog timer command 100
- Chassis commands 102
- Get chassis status command 103
- Chassis control command 104
- Chassis identify command 105
- Get POH counter command 111
- Event commands 112
- Get event receiver command 113
- SEL commands 114
- Clear SEL 117
- SEL record type ranges 117
- Get SEL time command 118
- Set SEL time command 118
- SDR record IDs 118
- Get SDR command 121
- Add SDR command 122
- Delete SDR command 123
- Clear SDR repository command 123
- Sensor Device Commands 126
- Get device SDR command 127
- Get sensor thresholds command 128
- Get sensor reading command 129
- DCMI specific commands 130
- ◦ [0] Reserved. Write as 0b 133
- Get DCMI sensor info command 134
- Set asset tag command 135
- PICMG specific commands 137
- Table 113 Site type values 138
- System Interfaces 140
- Network function codes 141
- Completion codes 142
- Channel numbers 145
- Logical channels 145
- Channel Privilege Levels 145
- Users & Password support 146
- IPMI sessions 146
- System interface messaging 147
- Bridging 148
- Bridged Request Example 149
- MC IPMB LUNs 151
- KCS Interface/MC LUNs 153
- LAN Interface 154
- RMCP Message Format 155
- Serial Over LAN (SOL) 156
- 7 Support and other resources 157
- Websites 158
- A Command Assignments 159
- B Verbose output examples 164
- 166 Verbose output examples 166
- 168 Verbose output examples 168
- 170 Verbose output examples 170
- 172 Verbose output examples 172
- At cartridge: 174
- 176 Verbose output examples 176
- 178 Verbose output examples 178
- 180 Verbose output examples 180
- 182 Verbose output examples 182
- 184 Verbose output examples 184
- Glossary 186
- 188 Index 188
Related products and manuals for Chassis components HP Moonshot 1500 Chassis
Chassis components HP 744 User Manual
(154 pages)
(154 pages)
Chassis components HP LP 1000r Service Manual
(100 pages)
(100 pages)
© 2020, manymanuals.com. All rights reserved. | 1.292 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals