HP 10413 Datasheet download pdf (Page 186)

186

CIRCLE

The circle command is similar. You should

position the cursor at the center of the

proposed circle. Pressing , move the

cursor outwards from the center, forming a

radius. As you do so you will see a small arc

appear, giving you an indication of the

curvature of the circle.

Pressing (or ENTER ) will then complete

the circle.

Finally, press to leave the drawing tools view.

Cut and paste (sort of…)

Using the key you can capture part of the

screen and store it into any of ten graphics

memories G1,G2..G9,G0 (called ‘GROBs’,

which is short for graphics objects). When

you press the message you see on the

right will appear, asking which GROB to use.

Storing to a GROB

Once you have chosen a GROB in which to

store the screen capture, you will need to

specify the corners of the rectangle to be

captured.

Once an image is captured, it is possible to

paste the captured screen portion into the a

Sketch page using the VAR key. The screen

does not have to be blank but to make things

clearer, create a new sketch page using the

key (see right). Notice the appearance

of a new key to allow movement between pages.

Using the VAR key

Press the VAR key and, when you see the

screen shown right, press the key labeled

.

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 330 331

Comments to this Manuals

No comments