HP 10413 Datasheet download pdf (Page 185)

185

There are two font sizes available via the

key, with the default size being large. If

you press the key then it will change to

. Although there is no apparent change

when you are typing in the text, the font will

become smaller when it appears in the

window. Only uppercase is available in this small font.

New sketch pages can be produced by pressing the key.

The key gives access to a slightly

enlarged menu of simple drawing tools. The

key seen on the far right exits from this

menu back to the original one.

DOT+

The small cursor (cross) in the middle of the

screen can be moved around using the arrow

keys. If you press the screen key labeled

then a trail will be drawn as you move

the cursor. Notice the small dot next to the

showing that it is engaged.

Pressing the key turns the cursor into an

eraser (and automatically disengages

as well). Pressing the same key again

disengages both keys and leaves the cursor

free to move with no effect on the Sketch.

LINE

Moving the cursor to one end of a proposed

line, you can now press the key and

move the cursor to the other end of the line.

When the line is correctly positioned, press the

key (or ).

BOX

A box is drawn in the same way. Position the

cursor at one corner, press the

key,

move the cursor to the diagonally opposite

corner and press .

1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 330 331

No comments

HP 10413 Datasheet Page 185