HP ProOne 400 G2 Base Model 20-inch Touch All-in-One PC User Manual download pdf (Page 81)

Hard drive and optical drive cables and connectors

Description

Optical drive cable

Hard drive cable

The hard drive and optical drive connectors are located near the middle of the computer. Each

connector is secured with two Torx screws and has two cables that connect to the system board.

The optical drive connector cables are longer than the hard drive connector cables.

To remove the hard drive or optical drive connector:

1. Prepare the computer for disassembly (see

Preparing to disassemble the computer on page 27).

2. Remove the rear cover (see

Rear cover on page 30).

3. Remove the VESA panel (see

VESA panel on page 55).

4. Remove the system board shield (see

System board shield on page 56).

5. Remove two Torx screws that secure the optical drive connector (1) or the hard drive connector

(3) to the computer.

6. Remove the cables from the metal clips built into the computer.

Hard drive and optical drive cables and connectors

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 183 184

No comments

HP ProOne 400 G2 Base Model 20-inch Touch All-in-One PC User Manual Page 81