HP R2200 User Manual download pdf (Page 8)

Component identification 8

Item Description Function

6 Battery Warning LED

Red—During a self-test, the UPS found that the batteries must be

recharged. Charge the batteries and repeat the self-test ("Initiating a self-

test" on page 35).

7 Mute/Test button

Silences UPS alarms and initiates a self-test ("Initiating a self-test" on

page 35).

IMPORTANT: While in Standby mode, the UPS maintains the charge on the batteries, but no power is

available at the output receptacles. The UPS remains in Standby mode until an alternate mode is selected or

until utility power is removed.

UPS R/T2200 NA/JPN/TWN rear panel

Item Description

Load segment 1 (one NEMA 5-15 output receptacle for

surge and battery backup protection)

Load segment 2 (one NEMA 5-15 output receptacle for

surge and battery backup protection)

Load segment 3 (one NEMA 5-20 output receptacle for

surge and battery backup protection)

Load segment 4 (five unswitchable NEMA 5-15/20 output

receptacles for surge and battery backup protection)

5 Input circuit breaker

6 Input power cord with NEMA 5-20 plug

7 Serial communications port

8 USB communications port

9 REPO port

10 Voltage configuration and charge rate DIP switches

11 Power sensitivity adjustment dial

12 Ground bonding screw

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 60 61

No comments

HP R2200 User Manual Page 8