HP R2200 User Manual download pdf (Page 24)

Installation 24

IMPORTANT: If using HPPM, connect the Management Server to an unswitched output receptacle ("UPS

R/T2200 INTL rear panel" on page 9, "UPS R/T2200 NA/JPN/TWN rear panel" on page 8), and then set

the Management Server as the last device to shutdown, ensuring that all connected load devices are

shutdown gracefully.

NOTE: To install and configure the software, see the software user guide. The software user guide is

available for download from the HP website (http://www.hp.com/go/rackandpower

Connecting the serial communications port

CAUTION: Use only the computer interface cable supplied with the UPS to connect the communications

port to the host computer.

CAUTION: Using a USB to serial converter cable will damage the UPS.

IMPORTANT: Power management software requires the communications port to be appropriately cabled

to the host computer.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 60 61

No comments

HP R2200 User Manual Page 24