HP SN6000 User's Guide Page 105
- Page / 122
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Fabric OS Command Reference 77
53-1003108-01
bootLunCfg
2
bootLunCfg
Transparently configures the boot LUN for an HBA.
SYNOPSIS bootluncfg --add HBA_WWN PWWN LUN_ID
bootluncfg --delete HBA_WWN [PWWN LUN_ID]
bootluncfg --show
bootluncfg --help
DESCRIPTION Use this command to configure the boot LUN for an HBA.
Existing fabric-based boot LUN discovery allows the host's boot LUN information to be stored in the
fabric zone database by using a zone name that contains the PWWN of an HBA port. The zone members
consist of storage target PWWN and LUN ID.
This command provides a simplified and transparent procedure for configuring the boot LUN. Once
configured, the HBA boot code queries the zone member list for the zone name matching the HBA
PWWN to determine the boot target and LUN.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
HBA_WWN
Specifies the WWN of the HBA port connecting to the boot LUN. This is a
hexadecimal number, for example, 10:00:00:000:05:1e:41:9a:cb.
PWWN
Specifies the WWN of the remote storage target's port. For example,
50:00:00:05:1e:41:9a:ca. This operand is required with the --add option and
optional with the --delete option.
LUN_ID
Specifies the hexadecimal LUN identification. The LUN ID is represented as an
eight-byte value (four-level LUN addressing), for example,
09AABBCCDDEEFF00. This operand is required with the --add option and
optional with the --delete option.
--add
Configures the specified HBA (HBA_WWN) to boot from the specified LUN
(LUN_WWN) accessible through the Target PWWN (PWWN).
--delete
Removes the mapping for the HBA (HBA_PWWN) to boot from the LUN (LUN_ID)
accessible through the Target Port (PWWN).
--show
Displays all configured HBA to Port/LUN Mappings.
--help
Displays the command usage.
- Fabric OS 1
- Document History 2
- Contents 7
- 53-1003108-01 10
- About This Document 21
- What is new in this document 22
- CLI usage conventions 23
- Document conventions 24
- Notice to the reader 25
- Additional information 26
- Getting technical help 26
- Document feedback 27
- Using Fabric OS Commands 29
- Role name Definition 30
- • Perform firmware download 31
- TABLE 5 AD types 32
- Fabric OS Command Reference 5 33
- 6 Fabric OS Command Reference 34
- Fabric OS Commands 35
- 8 Fabric OS Command Reference 36
- Fabric OS Command Reference 9 37
- SYNOPSIS ad --activate ad_id 41
- • Creates a new shell 43
- • Exits the shell 43
- EXAMPLES To enable AD5: 46
- To display all ADs: 48
- SYNOPSIS ag --help 51
- EXAMPLES 60
- AG failover policy commands 65
- Port Group commands 66
- Backup mapping commands 71
- SEE ALSO ag, agShow 74
- SYNOPSIS agshow 75
- SEE ALSO portCfgNPIVPort 76
- • A world wide name (WWN) 77
- SYNOPSIS aptpolicy [policy] 84
- • The FC OXID for this frame 85
- SEE ALSO auditDump, rasAdmin 88
- SYNOPSIS authutil 90
- SEE ALSO creditRecovMode 119
- SEE ALSO turboRamTest 124
- To display the changes: 126
- DESCRIPTION See portLedTest 128
- DESCRIPTION See turboRamTest 130
- (yes, y, no, n): [no] y 136
- SYNOPSIS cfgsize [integer] 145
- Chassis beacon success 1 150
- Chassis beacon success 0 150
- Value = 0 151
- (yes, y, no, n): [no]y 154
- SEE ALSO distribute, fddCfg 156
- SYNOPSIS chassisshow 159
- SEE ALSO slotShow 160
- • O = observe 161
- • OM = observe-modify 161
- • N = no access 161
- • Timestamp 165
- • Username 165
- • Options 165
- • Arguments 165
- To create an FCoE VLAN: 168
- SYNOPSIS configdownload 171
- SYNOPSIS configshow 179
- SYNOPSIS configupload 183
- SYNOPSIS configure 187
- • Cfgload attributes 197
- • Custom Attributes 197
- • System settings 197
- • fos attributes 197
- SEE ALSO bottleneckMon 202
- • For each HA cluster: 228
- • [-encrypt 247
- Operation succeeded 260
- Tue Oct 22 14:05:10 UTC 2013 264
- Tue Oct 22 14:06:00 UTC 2013 264
- • defzone --allaccess 267
- • cfgsave 267
- ERROR: DIAG CLEARERR 268
- Err# 0120041 081F 268
- • Switch domain IDs 275
- • Switch names 275
- • Switch WWNs 275
- SEE ALSO fddCfg 276
- DLS is not set 277
- • A local Fx_Port goes down 278
- OPERANDS --enable -lossless 279
- SEE ALSO chassisShow 286
- SYNOPSIS errdump [--all] 289
- SYNOPSIS errshow [-a 295
- DESCRIPTION See logout 297
- SYNOPSIS fabretryshow 298
- SYNOPSIS fabretrystats --show 300
- To clear the fabric name: 307
- SEE ALSO fabricShow 310
- SYNOPSIS fabstatsshow 314
- SEE ALSO fabRetryShow 315
- Fan unit 1 has been disabled 316
- Fan unit 1 has been enabled 317
- SYNOPSIS fcoelogincfg --show 335
- SEE ALSO fcoeLoginGroup 337
- SEE ALSO fcoeLoginCfg 339
- SYNOPSIS fcping 340
- SEE ALSO fcpRlsShow 354
- SYNOPSIS fcrconfigure --bbfid 359
- SYNOPSIS fcredgeshow 361
- SYNOPSIS fcrfabricshow 363
- SYNOPSIS fcrlsan 367
- LSAN Zone Limit: 3000 369
- LSAN Zone Limit: 5000 369
- SYNOPSIS fcrlsanmatrix 370
- SYNOPSIS fcrproxyconfig 377
- SYNOPSIS fcrresourceshow 381
- SYNOPSIS fcrxlateconfig 386
- SYNOPSIS fddcfg --showall 389
- SEE ALSO distribute 390
- SEE ALSO fdmiCacheShow 393
- SEE ALSO ficonCupShow 398
- SYNOPSIS ficoncupshow fmsmode 399
- 082300 1C Oper 401
- 082400 1A Reset 401
- 082400 1B Reset 401
- 612400 1F Reset 401
- • NOS recognized 404
- • Primitive sequence timeout 404
- • Link not operational 406
- SEE ALSO ficonClear 410
- Firmware version history 427
- FUNCTION Creating a flow 429
- FUNCTION Deleting a flow 441
- OPERANDS --create 445
- -action email 448
- • Ethernet switching service 451
- To enable Virtual Fabrics: 453
- To disable Virtual Fabrics: 453
- SYNOPSIS framelog --disable 457
- Log TX RX 459
- SYNOPSIS fspfshow 461
- FW: Alarms are enabled 465
- FW: Alarms are disabled 465
- WWN Alarm State: (0..31) [1] 469
- WWN Alarm Action: (0..17) [1] 469
- SFP Alarm State: (0..19) [0] 469
- SFP Alarm Action: (0..17) [0] 469
- SEE ALSO switchStatusShow 476
- HA is disabled 485
- SYNOPSIS hadump 486
- SEE ALSO haFailover, haShow 487
- SYNOPSIS hashow 490
- • Login user role 494
- • License key 494
- • Hardware platform 494
- Records: 11 496
- History Mode is: Rotating 497
- SEE ALSO historyLastShow 499
- SYNOPSIS i [processID] 500
- SEE ALSO diagHelp, routeHelp 501
- SEE ALSO ifModeShow 505
- SEE ALSO ifModeSet 507
- SYNOPSIS iflshow 508
- IOD is not set 516
- • iodset --show 517
- SEE ALSO ipAddrShow 524
- SYNOPSIS ipaddrshow 525
- - tentative 526
- - preferred 526
- - deprecated 526
- SEE ALSO ipAddrSet 527
- • Display policy parameters 535
- EXAMPLES Example 1 543
- EXAMPLES None 554
- OPERANDS feature 571
- To clone a group: 579
- To delete a group: 579
- Password: ****** 580
- To delete a logical switch: 587
- SEE ALSO lfCfg, setContext 589
- SYNOPSIS lsdbshow [domain] 590
- • fw_default_policy 595
- • fw_custom_policy 595
- • fw_active_policy 595
- To import a flow: 598
- To clear the history data: 602
- To display a policy: 606
- To enable a policy: 606
- To clear the report: 616
- Current Switch: switch 630
- SEE ALSO interfaceShow 632
- To verify the changes: 634
- • 8 - FCP type device 641
- • 5 - FC-IP type device 641
- SYNOPSIS nscamshow [-t] 642
- SYNOPSIS nsshow [-r][-t] 647
- • FC4s supported 648
- • IP address 648
- Zoned Members: 2 devices 654
- SYNOPSIS nszoneshow -pid pid 655
- To display the RD zone name: 656
- SYNOPSIS passwd 657
- • Password strength policy 660
- • Password history policy 660
- • Password expiration policy 660
- • Account lockout policy 660
- SEE ALSO passwd, userConfig 665
- SYNOPSIS pathinfo 666
- Please wait 679
- • 16 EE monitors per port 680
- (yes, y, no, n): [no] y 685
- 0x01 0 693
- 0x03 0 693
- RxSID Area: on 695
- RxSID ALPA: on 695
- RxDID Domain: on 695
- RxDID Area: on 695
- RxDID ALPA: on 695
- SYNOPSIS perfttmon 696
- of 512 bytes 706
- SEE ALSO portCfgLongDistance 709
- SEE ALSO switchShow 711
- SEE ALSO portBufferShow 752
- SEE ALSO portCfgShow 759
- • Trunk port 769
- • VC link init 769
- -fecdisable 773
- To configure desired buffers: 773
- SYNOPSIS portcfgshow 793
- SEE ALSO portCfg, portShow 818
- • A link traffic test 823
- SYNOPSIS porterrshow 832
- SYNOPSIS portfencing --show 834
- SYNOPSIS portledtest 839
- • FCPH, EXCHBAD 841
- • FCPH, EXCHFREE 841
- • NBFSM, DUPEPORTSCN 841
- • UCAST, RELICPDB 841
- PDISC log setting = 1 850
- SYNOPSIS portloopbacktest 863
- SEE ALSO itemList 866
- SYNOPSIS portmirror 867
- SYNOPSIS portname 871
- SYNOPSIS portperfshow 873
- SEE ALSO portStatsShow 876
- SYNOPSIS porttest 946
- All N->N loopback ports 948
- • Locks the port log 951
- SEE ALSO rasMan 973
- SEE ALSO rasAdmin 975
- - O = observe 979
- - OM = observe-modify 979
- - N = none/not available 979
- SEE ALSO classConfig 981
- (Max 1048576 bytes) 984
- SYNOPSIS seccertutil 987
- • Enable secure protocols 988
- • General security parameters 998
- • The latest zone transaction 998
- • The state of the Domain 998
- • wwnDL state 998
- No new data to abort 1001
- • DCC_POLICY_nnn 1004
- • FCS_POLICY 1004
- • SCC_POLICY 1004
- SEE ALSO secStatsShow 1023
- SEE ALSO secStatsReset 1025
- SYNOPSIS serdestunemode --set 1027
- SEE ALSO None 1029
- SYNOPSIS sfpshow 1033
- Disabling flowcontrol 1040
- Enabling flowcontrol 1041
- Slot 3 is being powered off 1042
- Powering on slot 3 1043
- SYNOPSIS slotshow [-m] [-p] 1044
- • User 5: snmpuser2 1052
- • User 6: snmpuser3 1052
- To set the security level: 1060
- To block access to SNMPv1/2c 1061
- Displays the command usage 1064
- SEE ALSO snmpConfig 1065
- SYNOPSIS spinfab 1066
- To test cascading ISLs: 1069
- username 1072
- SYNOPSIS supportftp [-S] 1078
- SYNOPSIS supportsave 1080
- SYNOPSIS supportshow 1084
- Config update Succeeded 1088
- iswitch enabled 1092
- asic_db enabled 1092
- fcip enabled 1092
- ag enabled 1092
- dce_hsl enabled 1092
- Switch persistent disable set 1095
- Committing configuration 1101
- SYNOPSIS switchshow 1102
- OPERANDS None 1118
- 9:50pm up for 20 mins 1123
- LOG_LOCAL1 1125
- • Send an SNMP message 1130
- • Log a RAS log message 1130
- SEE ALSO haDisable 1137
- • Log a RASlog message 1139
- • Send an E-mail alert 1139
- SYNOPSIS tracedump [-S] 1153
- Cleared Trace Buffer contents 1154
- SYNOPSIS trunkshow [-perf] 1156
- SEE ALSO date 1160
- PASSED 1165
- USB storage enabled 1170
- SYNOPSIS userconfig 1172
- SEE ALSO roleConfig 1179
- SEE ALSO portAddress 1184
- SYNOPSIS zone --help 1185
- • The device is not online 1191
- SEE ALSO ad, zoneHelp 1196
- • Node or port WWN 1197
- • Zone alias name 1197
- alias: jones 7,3; 4,5 1198
- Effective configuration: 1198
- • A world wide name 1208
- • A zone alias name 1208
- 40:00:00:05:1e:a1:cd:04 1209
- Primary FCS Commands 1213
- Primary FCS commands 1214
- Command Availability 1215
Related products and manuals for Software HP SN6000
Software HP 3PAR User Manual
(89 pages)
(89 pages)
Software HP NEOVIEW 544530-001 User Manual
(142 pages)
(142 pages)
Software HP 700wl User Manual
(388 pages)
(388 pages)
Software HP X9300 Installation Guide
(151 pages)
(151 pages)
Software HP SP1 User Manual
(143 pages)
(143 pages)
Software HP Q.11. (2510-24) User Manual
(294 pages)
(294 pages)
Software HP 441877-00F User Manual
(67 pages)
(67 pages)
Software HP 2000s User's Guide
(200 pages)
(200 pages)
Software HP 2012i User Manual
(86 pages)
(86 pages)
Software HP XP12000 User Manual
(38 pages)
(38 pages)
Software HP Moonshot-180G User's Guide
(719 pages)
(719 pages)
Software HP 377707-002 User Manual
(92 pages)
(92 pages)
Software HP 1TB User Manual
(80 pages)
(80 pages)
Software HP M401dne User Manual
(160 pages)
(160 pages)
Software HP 441877-00B User Manual
(176 pages)
(176 pages)
Software HP 200 User Manual
(676 pages)
(676 pages)
© 2020, manymanuals.com. All rights reserved. | 2.520 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals