HP D2D2502i User Manual download pdf (Page 142)

Please do not reply to this email.

******************************************************************************

The Event Log

The Log also contains warning messages if a disk fails.

Figure 35 Log showing disk failure (HP D2D4300/4100 Series)

Replacing a hot-plug hard disk

1. Identify the disk that has failed as described in How do I know a disk has failed? (page 137).

NOTE: Remember you can use the Beacon LED to identify the physical disk in the unit.

2. HP D2D4100 Series: The hard drives installed in the server are labeled from device 1 to device

12, from left to right, top to bottom, when viewed from the front of the server.

HP D2D4300 Series: The hard drives in the internal shelf are installed in two columns in the

server and each column is physically labeled from device 1 to device 6, bottom to top. When

viewed from the front of the server, the disks 1 to 6 in the far-right column relate to disks 1 to

6 on the Web Management Interface. The disks 1 to 6 in the inner column relate to disks 7

to 12 on the Web Management Interface. In the expansion shelves, they are installed in four

columns and are labeled from top to bottom, left to right.

HP D2D2500 Series: The drive bays are labeled from device 1 to device 4, from left to right,

when viewed from the front of the server.

Figure 36 Disk numbering (HP D2D4100 Series)

Figure 37 Disk numbering (HP D2D2500 Series)

142 Hard disk replacement

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 177 178

No comments

HP D2D2502i User Manual Page 142