HP INTEGRITY RX3600 User Manual download pdf (Page 57)

Figure 3-1 Removing and Replacing the Top Cover

Replacing the Top Cover

NOTE: Always replace the memory carrier assembly cover before replacing the top cover.

To replace the top cover, follow these steps:

1. Ensure the memory carrier assembly cover is in place.

2. Ensure the cover release lever is in the open position and that the memory cover is firmly

seated or the top cover cannot be installed (Figure 3-1).

3. Align the tabs of the top cover with the corresponding slots in the chassis. Insert the tabs

into the slots.

4. Slide the cover forward until it is flush with the front of the chassis.

5. Push the cover release lever down into the latched position (Figure 3-1).

6. Lock the cover release lever. Turning the cam 90 degrees clockwise.

Removing and Replacing the Memory Carrier Assembly Cover

This section describes how to remove and replace the memory carrier cover.

Removing the Memory Carrier Assembly Cover

To remove the memory carrier assembly cover, follow these steps:

1. Unlock the cover release lever. Turn the cam 90 degrees counterclockwise.

2. Pull up on the cover release lever to disengage the top cover and memory carrier assembly

cover from the chassis (Figure 3-1).

3. Slide the memory carrier assembly cover toward the left side of the server to free it from the

center of the chassis. Lift the cover off the chassis (Figure 3-2).

Installing Additional Components 57

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 355 356

No comments

HP INTEGRITY RX3600 User Manual Page 57